To purify water from mechanical impurities, Virlent Group Ltd. offers a product line of Yamit strainers with manual and automatic flushing. Each filter or filter system is selected and calculated individually, based on the customer’s provided data. Filtration fineness ranges from 10 microns to 1000 microns. Automatic filters can be with electric or hydraulic drive of cleaning mechanism. Horizontal and vertical design.
Yamit strainers.
Automatic self-cleaning filters can be equipped with a scanner or brush mechanism for cleaning the mesh from contaminants and have hydraulic or electric drive of the cleaning mechanism.
Automatic flushing is controlled by the controller, which operates from the system voltage 9V or 12V (direct current), 24V (alternating current) and is carried out after a certain time (programmed on the controller during commissioning) or when a certain pressure drop is reached (usually 0.5 bar).
Filter connection (inlet/outlet) – parallel or at an angle of 90°.
Body material – carbon steel with polyester coating 150-200 microns thick with subsequent heat treatment. Mesh material – stainless steel.
Filters are used for purification of insoluble impurities in water, which is supplied from rivers, wells, lakes, municipal water supply. The filter is used in all branches of industry, agriculture and municipal water supply.
Advantages:
– provides continuous supply of purified water even during washing;
– fully automatic operation of the filter;
– low energy consumption: the hydraulic drive is powered only by water pressure;
– stainless steel mesh with large filtration area;
– fast rinsing cycle (approx. 5 seconds), which significantly reduces water consumption for rinsing.
– The filter can be serviced without disconnecting it from the pipework.
Maximum capacity 1100 m³/h
Minimum pressure after pump 1.5 bar
Filtration fineness 1200, 2500 μm
Maximum capacity 1100 m³/h
Minimum pressure after pump 1.5 bar
Filtration fineness 1200, 2500 μm
Maximum capacity 380 m³/h
Minimum pressure after pump 1.5 bar
Filtration fineness 1200, 2500 microns
Maximum capacity 1500 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3/1.5 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 1100 m³/h
Maximum working pressure 10 bar
Minimum working pressure 0.7 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 1100 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3/1.5 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 650 m³/h
Maximum working pressure 10 bar
Minimum working pressure 0.7 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 600 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3/1.5 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 300 m³/h
Maximum working pressure 10 bar
Minimum working pressure 0.7 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 300 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3/1.5 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 160 m³/h
Maximum working pressure 10 bar
Minimum working pressure 0.7 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 160 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3/1.5 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 80 m³/h
Maximum working pressure 10 bar
Minimum working pressure 0.7 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 80 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3/1,5 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 50 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3/1,5 bar
Filtration fineness 10 – 1000 µm
Maximum capacity 30 m³/h
Maximum working pressure 10 bar
Minimum working pressure 3 bar
Filtration fineness 10 – 1000 µm
